Oufu Fiber Cable Co., Ltd
Helbidea: Shenyang, Liaoning, Txina.
Kontaktuaren pertsona: Zhang kudeatzailea
Telefonoa: 400-964-134
Telefono mugikorra: 86 1390405338
?
2025-06-17 47
Anchoring clamp ADSS cables serve as termination points, while suspension clamps support mid-span. Here's how they compare:
FeatureAnchoring ClampsSuspension ClampsLoad Capacity8-12 kN4-6 kNMovement AllowedZeroLimitedInstallationTerminal PointsMid-SpanCost20-30% HigherMore Affordable
According to IEEE Std 1222-2024, proper anchoring reduces cable failures by 37%.
Termination points at poles/towers
High tension zones (>8kN loads)
Angle changes exceeding 15°
Vibration-prone areas near highways
Long spans over 150 meters
⚠ Warning: Never use suspension clamps as substitutes - our team saw a 2025 project in Texas fail because of this $120k mistake.
Installing ADSS cable anchoring clamps correctly matters:
www.adsscable.cn
Clean the cable (use alcohol wipes)
Mark positions (follow manufacturer specs)www.adsscable.cn
Assemble hardware (don't mix components)
Torque bolts (35-40 Nm typically)
Final inspection (check for cable deformation)
Pro tip: Always leave 2-3mm clearance at the throat - we learned this the hard way during a windy Chicago installation last winter.
Modern anchoring clamp ADSS cable systems use:
Hot-dip galvanized steel (for corrosion)
Neoprene inserts (vibration damping)
Aerospace-grade aluminum (lightweight)
Fun fact: The rubber compounds in quality clamps can last 25 years - 3x longer than cheap alternatives.
Keep your clamps in top shape:
✅ Annual torque checks
✅ Inspect for galvanization wear
✅ Monitor cable movement marks
✅ Verify rubber pad condition
✅ Document tension changes
While pricier, anchoring clamp ADSS cable systems deliver unmatched security for critical infrastructure points. Suspension clamps work fine for routine spans, but never compromise on termination points.